FAQs - Changzhou longxin mechine Co., Ltd

FAQs

FAQs

Lintlha tseo tse robeli tlhokomelo ka kgetho le theko ya Sand Mill

1.Rotor lintho tse bonahalang: sila mekhoa ea leloala lehlabathe tse haholo-holo ka arotsoe ka mefuta e 'meli:' ngoe ke molamu-Pin mofuta male rotor le ho sila kamoreng, ka bobeli ke disk mofuta sila. Phello ho sila ea mofuta molamu-Pin e molemo haholo ho feta hore ba mofuta disk.

2.Cylinder lintho tse bonahalang: ho indasteri lehlabathe leloala, bahlahisi ho fetisisa e tla khetha celik tse bonahalang silindara. Empa ho na le ba bangata ba mefuta e fapaneng ya tsepe glassware, e lokela ho tiisoa ke moreki.

3.Equipment tsidifatso le phetha molao ho tiisoa ha e le hantle: Ha ho phetha molao ho tiisoa ha e le hantle o molemo. Haeba ho na le boemo boo ho dutla. nako e kae ke likhakanyo lifespan. Ntlha e ka sehloohong ea lipotso tsena ke hore ha ya diphalli e potoloha e entsoe ka metsi kapa solvent e qhalwa ho ya ka boitsebiso boo ho sila ho qoba sehlahiswa tloha ntse silafetse ka tshebetso tlhahiso le tahlehelo moruong.

4.Separation sesebediswa tsa lifaha Zirconium le Materials: Ka tshekaletseng leloala lehlabathe, le mahareng sila e haholo-holo a arohile ho lintho tse bonahalang ke sesebediswa karohano eo a qapa ka lesale phedisano le lesale ee sa fetoleng boemo.

5.Operation mokgwa wa: The ka sehloohong taolo karolo e bonolo ho sebetsa.

6.Production bokgoni: Utloahalang sebopeho moralo ka ho ntlafatsa tlhahiso ea bokgoni le boleng sehlahisoa

7.Safety tshireletso The kgetho le boleng ba thepa ea motlakase lokela ho netefatsa polokeho.

8.Replacement, mala a feto-fetohang le ho hloekisa ea lifaha zirconium: Ho thoe'ng ka phello ho intša ho hloekisa? Haeba moralo oa ho sila kamoreng e ntle le hlaha ka lehlakoreng le bafu?

Tsena ke lintlha tse robeli bareki lokela ho lefa a lebisa tlhokomelo ho ha a khetha le ho reka lehlabathe leloala. Tšepa ho tla ba molemo. Le amohelehile ho buisana le Changzhou Longxin mechine Co., Ltd. The Sales chesang-line: 0519-88608368

Kopo ea Three Roller Mill ka Ink Production

Ho sila mochine ho pharaletseng sebelisoa ka liindasteri tse ngata tseo ama bophelo ba rōna ba letsatsi le letsatsi. Ka lebaka la tsoelo-pele ea theknoloji, e boetse e kamehla ntseng li hōla moruong. Tse sa tšoaneng sila mochini hlaha mocheng tlhahiso. 'Me bana ba mofuta o fapaneng oa mochine na makgetheng bona le menyetla ea ho sebetsa hantle le fana ka tlhahiso ea rōna le bophelo. Tharo rolara leloala ke mofuta oa mochine ho pharaletseng sebediswa sila. Ho batla ho le le ba tšoaneloang ke re tse tharo rolara leloala ke ho feta molemo thepa mochine bakeng sa tlhahiso ea enke. O bitswang ke tšebeliso boemo ba tse tharo rolara leloala nakong tlhahiso ea enke.
Ntlha ea pele, ho sebelisa mehaho molao-motheo oa e meraro rolara leloala:
Bokaholimo ba rollers tse tharo o ile a lokisetsa tsekaletse ke extruded le khohlano ea lebelo e fapaneng e sebediswa ho fihlela e itseng sila sebediswa. Ka lebaka leo, ba bararo rolara leloala ka sila lintho tse bonahalang tse ka ho feletseng haholo-holo ka lebaka la ho sebetsa ha rollers tse tharo. Mona ka tlase ke likarolo tse tharo leloala rolara ha hlahisa enke.
1.The rolara hangata entsoe ka batang-thata tšepe motsoako lahletseng ka foromeletsoeng centrifugal kahoo thatafala ya holim'a metsi e phahameng haholo. Tharo rolara leloala ke matla a phahameng 'me ba roale manganga mochini sila le toughness matla. Ka hona, ka tshebetso ya ho fana ka tlhahiso enke, ho sebetsa ha rolara ke ke angoa ke khatello ea Link le mocheso.
2.The bophara ea rolara ho sona ke mobu o ka sebetsa ka ho nepahetseng phahameng, kahoo, ho ka sila ka nepo le ho etsa hore fineness boitsebiso enke ka tlase ho 5 microns, ka tsela eo ho hlahisa junifomo le lihlahisoa o motle oa boleng bo phahameng.
3.The drive tsamaiso ea tse tharo leloala rolara e boetse ke bath. Ho o inkela selotlolo mola sprocket bonolo simolleng. E le ho e sebetsang hantle haholo le boreleli ha sebetsa ntle ho lerata. Ho phaella moo, o inkela Row mofuta letsoho lebili nsete ho fetola sebaka moqolo le ho etsa opereishene bonolo le e nepahetseng.
4.Three rolara Mills fetola rengwa pakeng rollers ka laola ho tse tshekaletseng letsoho lebili nsete. E boetse e ka fetola ka phatsa boholo ba boitsebiso boo. Kahoo, ka tsela ena, tshebetso ya ho enke sila ba ho loketseng haholoanyane.
5.The tharo rolara leloala e hlomelloa le sesebelisoa sa Cooling ho dissipate mocheso generated ha mesebetsi rolara.
Ha e le hantle, Mills rolara tharo ke ke feela ho fihlela e le hantle marang-e metle, empa e boetse e finyella bokgoni phahameng. Makgetheng lona ba bangata ba khona ho tloaela ho hlahisa enke. Ka hona, le Mills rolara tharo tlhahiso enke e tsepisa haholo.

Di ditharollo tsa mathata bakeng sa liphoso tsa e Tloaelehileng ea Grinder Horizontal

Horizontal sila mochini ke ember ba sila mochini lelapa, e leng e tšoauoa ka silindara bueloang tshekaletseng. Tlhahiso letsatsi le letsatsi, e ke keng ea qojoa hore ho tla ba le ba bang ba mefokolo ea, empa ba bangata ba bona ka e felisoe ka ho bareki.
Ha ho na le bothata ba ho ajoa metsi, e kang ho hlōleha ho sebetsa, o ka hlahloba haeba belofo solenoid e khomaretsoe kapa e senyehileng, 'me nkela sebaka ha ho joalo.
Ha dilenaneo ke khomaretsoe, ho ka 'na hobane matla a diaphragm pompo e e sa fetola hantle. E ka rarolloa ka ho fetola lekapa lebanta ho fokotsa khatello ea filthara, joale restarting dilenaneo ena.
Ha diaphragm pompo ha arabela, hlahloba haeba belofo solenoid e senyehile. Ha belofo molamu e khomaretsoe, eketsa e nyenyane transformer oli monyako oa phala le kenya e khutlela ka phala ena. Ebe eketsa khatello le kokota ka pompo 'mele ea ho rarolla bothata.
Ha khatello ea lekanyetsa bokhoni ba ho bontša hore khatello ea e phahameng haholo, ho ka 'na hobane hore disk sefe e thibetsoeng le hloka ho hloekisa.
Ha metsi Cooling e whitening, ho ka ba le le bothata ba ho sealant ena.
Russia behang boemo ba e futhumatsang fetang 60 ℃, ho ka ba ho hloka botoro kapa behang senya, e lokela ho lokisoa ka nako.

Tripartite consideration on the selection of grinding media for bead mill There are three factors to be considered when selecting suitable bead grinding media for bead mill: particle size, density and chemical composition.

1)Particle size
A filter screen is installed at the outlet of the bead mill, through which the dispersed slurry is passed, and the grinding media must be stopped. Therefore, the diameter of beads must be larger than that of sieve holes. Experience has shown that the diameter of the grinding media is at least half larger than the maximum diameter of the sieve hole, otherwise the screen will be easily blocked. Due to the wear of beads in the grinding process, the diameter of actually used media should be enlarged properly. On the basis of not blocking the sieve hole, smaller beads should be used to provide more abrasive contact points, that is, the particle size needs to select a relatively balanced diameter .
2) Density
For common vertical bead mill, the lower the density of grinding media, the smaller the tendency of them sinking to the bottom of bead mill, and the smaller the degree of wear of bead particles and the sand mill. But the dispersion force is also smaller.
Therefore, for those materials which are easy to disperse or the agglomerates of which are smaller, the beads with lower density are more suitable. On the contrary, high density beads should be used. At this time, the viscosity of the raw slurry should be slightly higher so as to reduce the deposition of beads and affect the dispersion.
3)Chemical composition
All grinding media, whatever their composition, should not be crushed by various stresses during normal grinding.
The above is some experience of us. Welcome to our company to experience more grinding machine products.


WhatsApp Online Chat !